Bolt Pattern4x98
Center Bore58.1
Stud SizeM 12x1.25
Advertisement

Detailed tire and wheel breakdown for the 2015 Abarth 500

Tire geometry — 195/45R16

The 195/45R16 fitted to the 2015 Abarth 500 has a section width of 195mm and an aspect ratio of 45%, mounted on a 16-inch rim. That gives a sidewall height of 87.8mm (3.45") and an overall outside diameter of 581.9mm (22.91"). At highway speed this tire completes roughly 547 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2015 Abarth 500 while keeping the speedometer accurate, target a 205/37R17 (plus-one). For a softer ride or winter setup, a 185/54R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2015 Abarth 500 uses a 4x98 bolt pattern with a 58.1mm hub bore. Safe rim width range for the OEM tire is 6.0J – 7.0J, and offsets in the ET30 – ET40 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2015 Abarth 500 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
1.4L T-Jet Base195/45R1616" x 6.5ET35

Frequently Asked Questions

What tire size does the 2015 Abarth 500 1.4L T-Jet Base use?

The 2015 Abarth 500 1.4L T-Jet Base uses 195/45R16 tires as standard equipment.

What is the bolt pattern of the 2015 Abarth 500 1.4L T-Jet Base?

The 2015 Abarth 500 1.4L T-Jet Base has a 4x98 bolt pattern with a center bore of 58.1mm.

What is the wheel offset of the 2015 Abarth 500 1.4L T-Jet Base?

The 2015 Abarth 500 1.4L T-Jet Base has a wheel offset of ETET35.