2025 Aito M7 Bolt Pattern & Tire Size
The 2025 Aito M7 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2025 Aito M7 has a 5x114.3 bolt pattern, an OEM tire size of 255/50R20, and a 60.1mm center bore.
2025 Aito M7 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2025 Aito M7
Tire geometry â 255/50R20
The 255/50R20 fitted to the 2025 Aito M7 has a section width of 255mm and an aspect ratio of 50%, mounted on a 20-inch rim. That gives a sidewall height of 127.5mm (5.02") and an overall outside diameter of 763.0mm (30.04"). At highway speed this tire completes roughly 417 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2025 Aito M7 while keeping the speedometer accurate, target a 265/43R21 (plus-one). For a softer ride or winter setup, a 245/57R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2025 Aito M7 uses a 5x114.3 bolt pattern with a 60.1mm hub bore. Safe rim width range for the OEM tire is 8.0J â 9.0J, and offsets in the ET35 â ET45 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2025 Aito M7 is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2025 Aito M7 EREV use?
The 2025 Aito M7 EREV uses 255/50R20 tires as standard equipment.
What is the bolt pattern of the 2025 Aito M7?
The 2025 Aito M7 has a 5x114.3 bolt pattern with a center bore of 60.1mm.
What is the wheel offset of the 2025 Aito M7?
The 2025 Aito M7 has a wheel offset of ET40.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 2025 Aito M7, making wheel interchangeability possible (verify offset and center bore before swapping).