Bolt Pattern5x130
Center Bore71.6
Stud SizeM 14x1.50
Advertisement

Detailed tire and wheel breakdown for the 2010 Audi Q7

Tire geometry — 255/55R18

The 255/55R18 fitted to the 2010 Audi Q7 has a section width of 255mm and an aspect ratio of 55%, mounted on a 18-inch rim. That gives a sidewall height of 140.3mm (5.52") and an overall outside diameter of 737.7mm (29.04"). At highway speed this tire completes roughly 431 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2010 Audi Q7 while keeping the speedometer accurate, target a 265/48R19 (plus-one). For a softer ride or winter setup, a 245/62R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2010 Audi Q7 uses a 5x130 bolt pattern with a 71.6mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET51 – ET61 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2010 Audi Q7 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
3.0 TDI Base255/55R1818" x 8.0ET56

Frequently Asked Questions

What tire size does the 2010 Audi Q7 3.0 TDI Base use?

The 2010 Audi Q7 3.0 TDI Base uses 255/55R18 tires as standard equipment.

What is the bolt pattern of the 2010 Audi Q7 3.0 TDI Base?

The 2010 Audi Q7 3.0 TDI Base has a 5x130 bolt pattern with a center bore of 71.6mm.

What is the wheel offset of the 2010 Audi Q7 3.0 TDI Base?

The 2010 Audi Q7 3.0 TDI Base has a wheel offset of ETET56.