2013 Audi Q7 4.2 FSI S-Line
The 2013 Audi Q7 4.2 FSI S-Line tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 2013 Audi Q7
Tire geometry â 275/45R20
The 275/45R20 fitted to the 2013 Audi Q7 has a section width of 275mm and an aspect ratio of 45%, mounted on a 20-inch rim. That gives a sidewall height of 123.8mm (4.87") and an overall outside diameter of 755.5mm (29.74"). At highway speed this tire completes roughly 421 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2013 Audi Q7 while keeping the speedometer accurate, target a 285/39R21 (plus-one). For a softer ride or winter setup, a 265/51R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2013 Audi Q7 uses a 5x130 bolt pattern with a 71.6mm hub bore. Safe rim width range for the OEM tire is 8.5J â 9.5J, and offsets in the ET55 â ET65 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2013 Audi Q7 is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| 4.2 FSI S-Line | 275/45R20 | 20" x 9.0 | ET60 |
Frequently Asked Questions
What tire size does the 2013 Audi Q7 4.2 FSI S-Line use?
The 2013 Audi Q7 4.2 FSI S-Line uses 275/45R20 tires as standard equipment.
What is the bolt pattern of the 2013 Audi Q7 4.2 FSI S-Line?
The 2013 Audi Q7 4.2 FSI S-Line has a 5x130 bolt pattern with a center bore of 71.6mm.
What is the wheel offset of the 2013 Audi Q7 4.2 FSI S-Line?
The 2013 Audi Q7 4.2 FSI S-Line has a wheel offset of ETET60.