Bolt Pattern5x112
Center Bore66.5
Stud SizeM 14x1.50
Advertisement

Detailed tire and wheel breakdown for the 2019 Audi Q7

Tire geometry — 285/45R20

The 285/45R20 fitted to the 2019 Audi Q7 has a section width of 285mm and an aspect ratio of 45%, mounted on a 20-inch rim. That gives a sidewall height of 128.3mm (5.05") and an overall outside diameter of 764.5mm (30.10"). At highway speed this tire completes roughly 416 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2019 Audi Q7 while keeping the speedometer accurate, target a 295/39R21 (plus-one). For a softer ride or winter setup, a 275/51R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2019 Audi Q7 uses a 5x112 bolt pattern with a 66.5mm hub bore. Safe rim width range for the OEM tire is 8.5J – 9.5J, and offsets in the ET28 – ET38 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2019 Audi Q7 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
50 TDI S-Line285/45R2020" x 9.0ET33

Frequently Asked Questions

What tire size does the 2019 Audi Q7 50 TDI S-Line use?

The 2019 Audi Q7 50 TDI S-Line uses 285/45R20 tires as standard equipment.

What is the bolt pattern of the 2019 Audi Q7 50 TDI S-Line?

The 2019 Audi Q7 50 TDI S-Line has a 5x112 bolt pattern with a center bore of 66.5mm.

What is the wheel offset of the 2019 Audi Q7 50 TDI S-Line?

The 2019 Audi Q7 50 TDI S-Line has a wheel offset of ETET33.