The 2013 Audi RS3 has a 5x112 bolt pattern, an OEM tire size of 235/35R19, and a 57.1mm center bore.

Other years of the Audi RS3

2026 RS32025 RS32024 RS32023 RS32022 RS32021 RS32020 RS32019 RS32018 RS32017 RS32016 RS32015 RS32012 RS32011 RS3

2013 Audi RS3 Engine & Trim Levels

2.5 TFSI Quattro (340hp)
Bolt Pattern5x112
Center Bore57.1
Stud SizeM 14x1.50
Advertisement

Detailed tire and wheel breakdown for the 2013 Audi RS3

Tire geometry — 235/35R19

The 235/35R19 fitted to the 2013 Audi RS3 has a section width of 235mm and an aspect ratio of 35%, mounted on a 19-inch rim. That gives a sidewall height of 82.3mm (3.24") and an overall outside diameter of 647.1mm (25.48"). At highway speed this tire completes roughly 492 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2013 Audi RS3 while keeping the speedometer accurate, target a 245/28R20 (plus-one). For a softer ride or winter setup, a 225/42R18 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2013 Audi RS3 uses a 5x112 bolt pattern with a 57.1mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET45 – ET55 window will clear suspension and fender without rubbing on most setups.

Staggered setup notes

The 2013 Audi RS3 ships staggered: 235/35R19 up front and 225/35R19 on the rear. That is a 225mm vs 235mm width difference — do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2013 Audi RS3 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
2.5 TFSI Quattro (340hp)
Rear: 225/35R19
19x8.0JET50

Frequently Asked Questions

What tire size does the 2013 Audi RS3 2.5 TFSI Quattro (340hp) use?

The 2013 Audi RS3 2.5 TFSI Quattro (340hp) uses 235/35R19 tires as standard equipment.

What is the bolt pattern of the 2013 Audi RS3?

The 2013 Audi RS3 has a 5x112 bolt pattern with a center bore of 57.1mm.

What is the wheel offset of the 2013 Audi RS3?

The 2013 Audi RS3 has a wheel offset of ET50.

Other Vehicles with 5x112 Bolt Pattern

The following vehicles share the same 5x112 bolt pattern as the 2013 Audi RS3, making wheel interchangeability possible (verify offset and center bore before swapping).