Bolt Pattern5x112
Center Bore57.1
Stud SizeM 14x1.50
Advertisement

Detailed tire and wheel breakdown for the 2006 Audi S4

Tire geometry — 235/40R18

The 235/40R18 fitted to the 2006 Audi S4 has a section width of 235mm and an aspect ratio of 40%, mounted on a 18-inch rim. That gives a sidewall height of 94.0mm (3.70") and an overall outside diameter of 645.2mm (25.40"). At highway speed this tire completes roughly 493 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2006 Audi S4 while keeping the speedometer accurate, target a 245/33R19 (plus-one). For a softer ride or winter setup, a 225/47R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2006 Audi S4 uses a 5x112 bolt pattern with a 57.1mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET40 – ET50 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2006 Audi S4 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
4.2 V8 Quattro235/40R1818" x 8.0ET45

Frequently Asked Questions

What tire size does the 2006 Audi S4 4.2 V8 Quattro use?

The 2006 Audi S4 4.2 V8 Quattro uses 235/40R18 tires as standard equipment.

What is the bolt pattern of the 2006 Audi S4 4.2 V8 Quattro?

The 2006 Audi S4 4.2 V8 Quattro has a 5x112 bolt pattern with a center bore of 57.1mm.

What is the wheel offset of the 2006 Audi S4 4.2 V8 Quattro?

The 2006 Audi S4 4.2 V8 Quattro has a wheel offset of ETET45.