Bolt Pattern5x112
Center Bore57.1
Stud SizeM 14x1.50
Advertisement

Detailed tire and wheel breakdown for the 2010 Audi TT

Tire geometry — 225/50R17

The 225/50R17 fitted to the 2010 Audi TT has a section width of 225mm and an aspect ratio of 50%, mounted on a 17-inch rim. That gives a sidewall height of 112.5mm (4.43") and an overall outside diameter of 656.8mm (25.86"). At highway speed this tire completes roughly 485 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2010 Audi TT while keeping the speedometer accurate, target a 235/42R18 (plus-one). For a softer ride or winter setup, a 215/58R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2010 Audi TT uses a 5x112 bolt pattern with a 57.1mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET42 – ET52 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2010 Audi TT is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
2.0 TFSI Coupe225/50R1717" x 8.0ET47

Frequently Asked Questions

What tire size does the 2010 Audi TT 2.0 TFSI Coupe use?

The 2010 Audi TT 2.0 TFSI Coupe uses 225/50R17 tires as standard equipment.

What is the bolt pattern of the 2010 Audi TT 2.0 TFSI Coupe?

The 2010 Audi TT 2.0 TFSI Coupe has a 5x112 bolt pattern with a center bore of 57.1mm.

What is the wheel offset of the 2010 Audi TT 2.0 TFSI Coupe?

The 2010 Audi TT 2.0 TFSI Coupe has a wheel offset of ETET47.