2010 Bentley Flying Spur Bolt Pattern & Tire Size
The 2010 Bentley Flying Spur OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2010 Bentley Flying Spur has a 5x112 bolt pattern, an OEM tire size of 275/40R19, and a 57.1mm center bore.
Other years of the Bentley Flying Spur
2010 Bentley Flying Spur Engine & Trim Levels
Detailed tire and wheel breakdown for the 2010 Bentley Flying Spur
Tire geometry â 275/40R19
The 275/40R19 fitted to the 2010 Bentley Flying Spur has a section width of 275mm and an aspect ratio of 40%, mounted on a 19-inch rim. That gives a sidewall height of 110.0mm (4.33") and an overall outside diameter of 702.6mm (27.66"). At highway speed this tire completes roughly 453 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2010 Bentley Flying Spur while keeping the speedometer accurate, target a 285/34R20 (plus-one). For a softer ride or winter setup, a 265/46R18 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2010 Bentley Flying Spur uses a 5x112 bolt pattern with a 57.1mm hub bore. Safe rim width range for the OEM tire is 8.5J â 9.5J, and offsets in the ET36 â ET46 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2010 Bentley Flying Spur is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2010 Bentley Flying Spur W12 use?
The 2010 Bentley Flying Spur W12 uses 275/40R19 tires as standard equipment.
What is the bolt pattern of the 2010 Bentley Flying Spur?
The 2010 Bentley Flying Spur has a 5x112 bolt pattern with a center bore of 57.1mm.
What is the wheel offset of the 2010 Bentley Flying Spur?
The 2010 Bentley Flying Spur has a wheel offset of ET41.
Other Vehicles with 5x112 Bolt Pattern
The following vehicles share the same 5x112 bolt pattern as the 2010 Bentley Flying Spur, making wheel interchangeability possible (verify offset and center bore before swapping).