2012 BMW 7 Series Bolt Pattern & Tire Size
The 2012 BMW 7 Series OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2012 BMW 7 Series has a 5x120 bolt pattern, an OEM tire size of 245/50R18, and a 72.6mm center bore.
Other years of the BMW 7 Series
2012 BMW 7 Series Engine & Trim Levels
Detailed tire and wheel breakdown for the 2012 BMW 7 Series
Tire geometry â 245/50R18
The 245/50R18 fitted to the 2012 BMW 7 Series has a section width of 245mm and an aspect ratio of 50%, mounted on a 18-inch rim. That gives a sidewall height of 122.5mm (4.82") and an overall outside diameter of 702.2mm (27.65"). At highway speed this tire completes roughly 453 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2012 BMW 7 Series while keeping the speedometer accurate, target a 255/43R19 (plus-one). For a softer ride or winter setup, a 235/58R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2012 BMW 7 Series uses a 5x120 bolt pattern with a 72.6mm hub bore. Safe rim width range for the OEM tire is 7.5J â 8.5J, and offsets in the ET25 â ET35 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2012 BMW 7 Series is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
| Engine & Trim | Tire Size | Rim Size | Offset (ET) | |
|---|---|---|---|---|
| 740i/750Li | 18x8.0J | ET30 |
Frequently Asked Questions
What tire size does the 2012 BMW 7 Series 740i/750Li use?
The 2012 BMW 7 Series 740i/750Li uses 245/50R18 tires as standard equipment.
What is the bolt pattern of the 2012 BMW 7 Series?
The 2012 BMW 7 Series has a 5x120 bolt pattern with a center bore of 72.6mm.
What is the wheel offset of the 2012 BMW 7 Series?
The 2012 BMW 7 Series has a wheel offset of ET30.
Other Vehicles with 5x120 Bolt Pattern
The following vehicles share the same 5x120 bolt pattern as the 2012 BMW 7 Series, making wheel interchangeability possible (verify offset and center bore before swapping).