2019 Bowler Bulldog Bolt Pattern & Tire Size
The 2019 Bowler Bulldog OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2019 Bowler Bulldog has a 5x165.1 bolt pattern, an OEM tire size of 265/70R16, and a 113.1mm center bore.
Other years of the Bowler Bulldog
2019 Bowler Bulldog Engine & Trim Levels
Detailed tire and wheel breakdown for the 2019 Bowler Bulldog
Tire geometry â 265/70R16
The 265/70R16 fitted to the 2019 Bowler Bulldog has a section width of 265mm and an aspect ratio of 70%, mounted on a 16-inch rim. That gives a sidewall height of 185.5mm (7.30") and an overall outside diameter of 777.4mm (30.61"). At highway speed this tire completes roughly 409 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2019 Bowler Bulldog while keeping the speedometer accurate, target a 275/63R17 (plus-one). For a softer ride or winter setup, a 255/78R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2019 Bowler Bulldog uses a 5x165.1 bolt pattern with a 113.1mm hub bore. Safe rim width range for the OEM tire is 7.5J â 8.5J, and offsets in the ET5 â ET15 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2019 Bowler Bulldog is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2019 Bowler Bulldog V8 use?
The 2019 Bowler Bulldog V8 uses 265/70R16 tires as standard equipment.
What is the bolt pattern of the 2019 Bowler Bulldog?
The 2019 Bowler Bulldog has a 5x165.1 bolt pattern with a center bore of 113.1mm.
What is the wheel offset of the 2019 Bowler Bulldog?
The 2019 Bowler Bulldog has a wheel offset of ET10.
Other Vehicles with 5x165.1 Bolt Pattern
The following vehicles share the same 5x165.1 bolt pattern as the 2019 Bowler Bulldog, making wheel interchangeability possible (verify offset and center bore before swapping).