2008 Chrysler 300 Bolt Pattern & Tire Size
The 2008 Chrysler 300 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2008 Chrysler 300 has a 5x115 bolt pattern, an OEM tire size of 215/65R17, and a 71.5mm center bore.
Other years of the Chrysler 300
2008 Chrysler 300 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2008 Chrysler 300
Tire geometry â 215/65R17
The 215/65R17 fitted to the 2008 Chrysler 300 has a section width of 215mm and an aspect ratio of 65%, mounted on a 17-inch rim. That gives a sidewall height of 139.8mm (5.50") and an overall outside diameter of 711.3mm (28.00"). At highway speed this tire completes roughly 448 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2008 Chrysler 300 while keeping the speedometer accurate, target a 225/56R18 (plus-one). For a softer ride or winter setup, a 205/74R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2008 Chrysler 300 uses a 5x115 bolt pattern with a 71.5mm hub bore. Safe rim width range for the OEM tire is 6.5J â 7.5J, and offsets in the ET17 â ET27 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2008 Chrysler 300 is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
| Engine & Trim | Tire Size | Rim Size | Offset (ET) | |
|---|---|---|---|---|
| Touring V6 | 17x7.0J | ET22 |
Frequently Asked Questions
What tire size does the 2008 Chrysler 300 Touring V6 use?
The 2008 Chrysler 300 Touring V6 uses 215/65R17 tires as standard equipment.
What is the bolt pattern of the 2008 Chrysler 300?
The 2008 Chrysler 300 has a 5x115 bolt pattern with a center bore of 71.5mm.
What is the wheel offset of the 2008 Chrysler 300?
The 2008 Chrysler 300 has a wheel offset of ET22.
Other Vehicles with 5x115 Bolt Pattern
The following vehicles share the same 5x115 bolt pattern as the 2008 Chrysler 300, making wheel interchangeability possible (verify offset and center bore before swapping).