2022 Cupra Formentor VZ5
The 2022 Cupra Formentor VZ5 tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 2022 Cupra Formentor
Tire geometry â 255/35R20
The 255/35R20 fitted to the 2022 Cupra Formentor has a section width of 255mm and an aspect ratio of 35%, mounted on a 20-inch rim. That gives a sidewall height of 89.3mm (3.51") and an overall outside diameter of 686.5mm (27.03"). At highway speed this tire completes roughly 464 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2022 Cupra Formentor while keeping the speedometer accurate, target a 265/29R21 (plus-one). For a softer ride or winter setup, a 245/42R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2022 Cupra Formentor uses a 5x112 bolt pattern with a 57.1mm hub bore. Safe rim width range for the OEM tire is 8.0J â 9.0J, and offsets in the ET35 â ET45 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2022 Cupra Formentor is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| VZ5 | 255/35R20 | 20" x 8.5 | ET40 |
Frequently Asked Questions
What tire size does the 2022 Cupra Formentor VZ5 use?
The 2022 Cupra Formentor VZ5 uses 255/35R20 tires as standard equipment.
What is the bolt pattern of the 2022 Cupra Formentor VZ5?
The 2022 Cupra Formentor VZ5 has a 5x112 bolt pattern with a center bore of 57.1mm.
What is the wheel offset of the 2022 Cupra Formentor VZ5?
The 2022 Cupra Formentor VZ5 has a wheel offset of ETET40.