Bolt Pattern5x114.3
Center Bore60.1
Stud SizeM 12x1.5
Advertisement

Detailed tire and wheel breakdown for the 2019 Dongfeng Glory 580

Tire geometry — 225/60R17

The 225/60R17 fitted to the 2019 Dongfeng Glory 580 has a section width of 225mm and an aspect ratio of 60%, mounted on a 17-inch rim. That gives a sidewall height of 135.0mm (5.31") and an overall outside diameter of 701.8mm (27.63"). At highway speed this tire completes roughly 454 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2019 Dongfeng Glory 580 while keeping the speedometer accurate, target a 235/52R18 (plus-one). For a softer ride or winter setup, a 215/69R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2019 Dongfeng Glory 580 uses a 5x114.3 bolt pattern with a 60.1mm hub bore. Safe rim width range for the OEM tire is 6.5J – 7.5J, and offsets in the ET40 – ET50 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2019 Dongfeng Glory 580 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
1.5T225/60R1717" x 7.0ET45

Frequently Asked Questions

What tire size does the 2019 Dongfeng Glory 580 1.5T use?

The 2019 Dongfeng Glory 580 1.5T uses 225/60R17 tires as standard equipment.

What is the bolt pattern of the 2019 Dongfeng Glory 580 1.5T?

The 2019 Dongfeng Glory 580 1.5T has a 5x114.3 bolt pattern with a center bore of 60.1mm.

What is the wheel offset of the 2019 Dongfeng Glory 580 1.5T?

The 2019 Dongfeng Glory 580 1.5T has a wheel offset of ETET45.