2003 Fiat Panda 4x4
The 2003 Fiat Panda 4x4 tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 2003 Fiat Panda
Tire geometry â 145/80R13
The 145/80R13 fitted to the 2003 Fiat Panda has a section width of 145mm and an aspect ratio of 80%, mounted on a 13-inch rim. That gives a sidewall height of 116.0mm (4.57") and an overall outside diameter of 562.2mm (22.13"). At highway speed this tire completes roughly 566 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2003 Fiat Panda while keeping the speedometer accurate, target a 155/67R14 (plus-one). For a softer ride or winter setup, a 135/95R12 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2003 Fiat Panda uses a 4x98 bolt pattern with a 58.1mm hub bore. Safe rim width range for the OEM tire is 4.0J â 5.0J, and offsets in the ET30 â ET40 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2003 Fiat Panda is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| 4x4 | 145/80R13 | 13" x 4.5 | ET35 |
Frequently Asked Questions
What tire size does the 2003 Fiat Panda 4x4 use?
The 2003 Fiat Panda 4x4 uses 145/80R13 tires as standard equipment.
What is the bolt pattern of the 2003 Fiat Panda 4x4?
The 2003 Fiat Panda 4x4 has a 4x98 bolt pattern with a center bore of 58.1mm.
What is the wheel offset of the 2003 Fiat Panda 4x4?
The 2003 Fiat Panda 4x4 has a wheel offset of ETET35.