Bolt Pattern5x114.3
Center Bore63.4
Stud SizeM 12x1.5
Advertisement

Detailed tire and wheel breakdown for the 2013 Ford Explorer

Tire geometry — 255/50R20

The 255/50R20 fitted to the 2013 Ford Explorer has a section width of 255mm and an aspect ratio of 50%, mounted on a 20-inch rim. That gives a sidewall height of 127.5mm (5.02") and an overall outside diameter of 763.0mm (30.04"). At highway speed this tire completes roughly 417 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2013 Ford Explorer while keeping the speedometer accurate, target a 265/43R21 (plus-one). For a softer ride or winter setup, a 245/57R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2013 Ford Explorer uses a 5x114.3 bolt pattern with a 63.4mm hub bore. Safe rim width range for the OEM tire is 8.0J – 9.0J, and offsets in the ET39 – ET49 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2013 Ford Explorer is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
Sport255/50R2020" x 8.5ET44

Frequently Asked Questions

What tire size does the 2013 Ford Explorer Sport use?

The 2013 Ford Explorer Sport uses 255/50R20 tires as standard equipment.

What is the bolt pattern of the 2013 Ford Explorer Sport?

The 2013 Ford Explorer Sport has a 5x114.3 bolt pattern with a center bore of 63.4mm.

What is the wheel offset of the 2013 Ford Explorer Sport?

The 2013 Ford Explorer Sport has a wheel offset of ETET44.