2024 GMC Canyon Bolt Pattern & Tire Size
The 2024 GMC Canyon OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2024 GMC Canyon has a 6x139.7 bolt pattern, an OEM tire size of 285/70R17, and a 78.1mm center bore.
Other years of the GMC Canyon
2024 GMC Canyon Engine & Trim Levels
Detailed tire and wheel breakdown for the 2024 GMC Canyon
Tire geometry â 285/70R17
The 285/70R17 fitted to the 2024 GMC Canyon has a section width of 285mm and an aspect ratio of 70%, mounted on a 17-inch rim. That gives a sidewall height of 199.5mm (7.85") and an overall outside diameter of 830.8mm (32.71"). At highway speed this tire completes roughly 383 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2024 GMC Canyon while keeping the speedometer accurate, target a 295/63R18 (plus-one). For a softer ride or winter setup, a 275/77R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2024 GMC Canyon uses a 6x139.7 bolt pattern with a 78.1mm hub bore. Safe rim width range for the OEM tire is 8.0J â 9.0J, and offsets in the ET17 â ET27 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2024 GMC Canyon is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2024 GMC Canyon AT4X use?
The 2024 GMC Canyon AT4X uses 285/70R17 tires as standard equipment.
What is the bolt pattern of the 2024 GMC Canyon?
The 2024 GMC Canyon has a 6x139.7 bolt pattern with a center bore of 78.1mm.
What is the wheel offset of the 2024 GMC Canyon?
The 2024 GMC Canyon has a wheel offset of ET22.
Other Vehicles with 6x139.7 Bolt Pattern
The following vehicles share the same 6x139.7 bolt pattern as the 2024 GMC Canyon, making wheel interchangeability possible (verify offset and center bore before swapping).