2026 Gordon Murray Automotive T.33 Bolt Pattern & Tire Size
The 2026 Gordon Murray Automotive T.33 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2026 Gordon Murray Automotive T.33 has a 5x114.3 bolt pattern, an OEM tire size of 235/35R19, and a 67.1mm center bore.
2026 Gordon Murray Automotive T.33 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2026 Gordon Murray Automotive T.33
Tire geometry â 235/35R19
The 235/35R19 fitted to the 2026 Gordon Murray Automotive T.33 has a section width of 235mm and an aspect ratio of 35%, mounted on a 19-inch rim. That gives a sidewall height of 82.3mm (3.24") and an overall outside diameter of 647.1mm (25.48"). At highway speed this tire completes roughly 492 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2026 Gordon Murray Automotive T.33 while keeping the speedometer accurate, target a 245/28R20 (plus-one). For a softer ride or winter setup, a 225/42R18 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2026 Gordon Murray Automotive T.33 uses a 5x114.3 bolt pattern with a 67.1mm hub bore. Safe rim width range for the OEM tire is 8.0J â 9.0J, and offsets in the ET40 â ET50 window will clear suspension and fender without rubbing on most setups.
Staggered setup notes
The 2026 Gordon Murray Automotive T.33 ships staggered: 235/35R19 up front and 295/30R20 on the rear. That is a 295mm vs 235mm width difference â do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2026 Gordon Murray Automotive T.33 is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2026 Gordon Murray Automotive T.33 Base use?
The 2026 Gordon Murray Automotive T.33 Base uses 235/35R19 tires as standard equipment.
What is the bolt pattern of the 2026 Gordon Murray Automotive T.33?
The 2026 Gordon Murray Automotive T.33 has a 5x114.3 bolt pattern with a center bore of 67.1mm.
What is the wheel offset of the 2026 Gordon Murray Automotive T.33?
The 2026 Gordon Murray Automotive T.33 has a wheel offset of ET45.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 2026 Gordon Murray Automotive T.33, making wheel interchangeability possible (verify offset and center bore before swapping).