The 2026 HiPhi Z has a 5x120 bolt pattern, an OEM tire size of 255/40R22, and a 74.1mm center bore.

Other years of the HiPhi Z

2025 Z2024 Z2023 Z2022 Z

2026 HiPhi Z Engine & Trim Levels

GT
Bolt Pattern5x120
Center Bore74.1
Stud SizeM 14x1.5
Advertisement

Detailed tire and wheel breakdown for the 2026 HiPhi Z

Tire geometry — 255/40R22

The 255/40R22 fitted to the 2026 HiPhi Z has a section width of 255mm and an aspect ratio of 40%, mounted on a 22-inch rim. That gives a sidewall height of 102.0mm (4.02") and an overall outside diameter of 762.8mm (30.03"). At highway speed this tire completes roughly 417 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2026 HiPhi Z while keeping the speedometer accurate, target a 265/34R23 (plus-one). For a softer ride or winter setup, a 245/47R21 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2026 HiPhi Z uses a 5x120 bolt pattern with a 74.1mm hub bore. Safe rim width range for the OEM tire is 8.5J – 9.5J, and offsets in the ET37 – ET47 window will clear suspension and fender without rubbing on most setups.

Staggered setup notes

The 2026 HiPhi Z ships staggered: 255/40R22 up front and 285/35R22 on the rear. That is a 285mm vs 255mm width difference — do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2026 HiPhi Z is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
GT
Rear: 285/35R22
22x9.0JET42

Frequently Asked Questions

What tire size does the 2026 HiPhi Z GT use?

The 2026 HiPhi Z GT uses 255/40R22 tires as standard equipment.

What is the bolt pattern of the 2026 HiPhi Z?

The 2026 HiPhi Z has a 5x120 bolt pattern with a center bore of 74.1mm.

What is the wheel offset of the 2026 HiPhi Z?

The 2026 HiPhi Z has a wheel offset of ET42.

Other Vehicles with 5x120 Bolt Pattern

The following vehicles share the same 5x120 bolt pattern as the 2026 HiPhi Z, making wheel interchangeability possible (verify offset and center bore before swapping).