1998 Honda CR-V Bolt Pattern & Tire Size
The 1998 Honda CR-V OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 1998 Honda CR-V has a 5x114.3 bolt pattern, an OEM tire size of 205/70R15, and a 64.1mm center bore.
Other years of the Honda CR-V
1998 Honda CR-V Engine & Trim Levels
Detailed tire and wheel breakdown for the 1998 Honda CR-V
Tire geometry â 205/70R15
The 205/70R15 fitted to the 1998 Honda CR-V has a section width of 205mm and an aspect ratio of 70%, mounted on a 15-inch rim. That gives a sidewall height of 143.5mm (5.65") and an overall outside diameter of 668.0mm (26.30"). At highway speed this tire completes roughly 477 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 1998 Honda CR-V while keeping the speedometer accurate, target a 215/61R16 (plus-one). For a softer ride or winter setup, a 195/80R14 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 1998 Honda CR-V uses a 5x114.3 bolt pattern with a 64.1mm hub bore. Safe rim width range for the OEM tire is 5.5J â 6.5J, and offsets in the ET45 â ET55 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 1998 Honda CR-V is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 1998 Honda CR-V EX use?
The 1998 Honda CR-V EX uses 205/70R15 tires as standard equipment.
What is the bolt pattern of the 1998 Honda CR-V?
The 1998 Honda CR-V has a 5x114.3 bolt pattern with a center bore of 64.1mm.
What is the wheel offset of the 1998 Honda CR-V?
The 1998 Honda CR-V has a wheel offset of ET50.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 1998 Honda CR-V, making wheel interchangeability possible (verify offset and center bore before swapping).