2024 Hyundai Kona Bolt Pattern & Tire Size
The 2024 Hyundai Kona OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2024 Hyundai Kona has a 5x114.3 bolt pattern, an OEM tire size of 235/45R19, and a 67.1mm center bore.
Other years of the Hyundai Kona
2024 Hyundai Kona Engine & Trim Levels
Detailed tire and wheel breakdown for the 2024 Hyundai Kona
Tire geometry â 235/45R19
The 235/45R19 fitted to the 2024 Hyundai Kona has a section width of 235mm and an aspect ratio of 45%, mounted on a 19-inch rim. That gives a sidewall height of 105.8mm (4.16") and an overall outside diameter of 694.1mm (27.33"). At highway speed this tire completes roughly 459 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2024 Hyundai Kona while keeping the speedometer accurate, target a 245/38R20 (plus-one). For a softer ride or winter setup, a 225/53R18 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2024 Hyundai Kona uses a 5x114.3 bolt pattern with a 67.1mm hub bore. Safe rim width range for the OEM tire is 7.0J â 8.0J, and offsets in the ET46 â ET56 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2024 Hyundai Kona is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2024 Hyundai Kona N Line use?
The 2024 Hyundai Kona N Line uses 235/45R19 tires as standard equipment.
What is the bolt pattern of the 2024 Hyundai Kona?
The 2024 Hyundai Kona has a 5x114.3 bolt pattern with a center bore of 67.1mm.
What is the wheel offset of the 2024 Hyundai Kona?
The 2024 Hyundai Kona has a wheel offset of ET51.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 2024 Hyundai Kona, making wheel interchangeability possible (verify offset and center bore before swapping).