2019 Hyundai Santa Fe Bolt Pattern & Tire Size
The 2019 Hyundai Santa Fe OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2019 Hyundai Santa Fe has a 5x114.3 bolt pattern, an OEM tire size of 255/45R20, and a 67.1mm center bore.
Other years of the Hyundai Santa Fe
2019 Hyundai Santa Fe Engine & Trim Levels
Detailed tire and wheel breakdown for the 2019 Hyundai Santa Fe
Tire geometry â 255/45R20
The 255/45R20 fitted to the 2019 Hyundai Santa Fe has a section width of 255mm and an aspect ratio of 45%, mounted on a 20-inch rim. That gives a sidewall height of 114.8mm (4.52") and an overall outside diameter of 737.5mm (29.04"). At highway speed this tire completes roughly 432 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2019 Hyundai Santa Fe while keeping the speedometer accurate, target a 265/39R21 (plus-one). For a softer ride or winter setup, a 245/52R19 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2019 Hyundai Santa Fe uses a 5x114.3 bolt pattern with a 67.1mm hub bore. Safe rim width range for the OEM tire is 8.0J â 9.0J, and offsets in the ET49 â ET59 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2019 Hyundai Santa Fe is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
| Engine & Trim | Tire Size | Rim Size | Offset (ET) | |
|---|---|---|---|---|
| Calligraphy | 20x8.5J | ET54 |
Frequently Asked Questions
What tire size does the 2019 Hyundai Santa Fe Calligraphy use?
The 2019 Hyundai Santa Fe Calligraphy uses 255/45R20 tires as standard equipment.
What is the bolt pattern of the 2019 Hyundai Santa Fe?
The 2019 Hyundai Santa Fe has a 5x114.3 bolt pattern with a center bore of 67.1mm.
What is the wheel offset of the 2019 Hyundai Santa Fe?
The 2019 Hyundai Santa Fe has a wheel offset of ET54.
Other Vehicles with 5x114.3 Bolt Pattern
The following vehicles share the same 5x114.3 bolt pattern as the 2019 Hyundai Santa Fe, making wheel interchangeability possible (verify offset and center bore before swapping).