2021 Ikco Dena Bolt Pattern & Tire Size
The 2021 Ikco Dena OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2021 Ikco Dena has a 4x108 bolt pattern, an OEM tire size of 185/65R15, and a 65.1mm center bore.
Other years of the Ikco Dena
2021 Ikco Dena Engine & Trim Levels
Detailed tire and wheel breakdown for the 2021 Ikco Dena
Tire geometry — 185/65R15
The 185/65R15 fitted to the 2021 Ikco Dena has a section width of 185mm and an aspect ratio of 65%, mounted on a 15-inch rim. That gives a sidewall height of 120.3mm (4.73") and an overall outside diameter of 621.5mm (24.47"). At highway speed this tire completes roughly 512 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2021 Ikco Dena while keeping the speedometer accurate, target a 195/55R16 (plus-one). For a softer ride or winter setup, a 175/76R14 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2021 Ikco Dena uses a 4x108 bolt pattern with a 65.1mm hub bore. Safe rim width range for the OEM tire is 6.0J – 7.0J, and offsets in the ET19 – ET29 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2021 Ikco Dena is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2021 Ikco Dena Plus use?
The 2021 Ikco Dena Plus uses 185/65R15 tires as standard equipment.
What is the bolt pattern of the 2021 Ikco Dena?
The 2021 Ikco Dena has a 4x108 bolt pattern with a center bore of 65.1mm.
What is the wheel offset of the 2021 Ikco Dena?
The 2021 Ikco Dena has a wheel offset of ET24.
Other Vehicles with 4x108 Bolt Pattern
The following vehicles share the same 4x108 bolt pattern as the 2021 Ikco Dena, making wheel interchangeability possible (verify offset and center bore before swapping).