2022 Jannarelly Design-1 Bolt Pattern & Tire Size
The 2022 Jannarelly Design-1 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2022 Jannarelly Design-1 has a 4x100 bolt pattern, an OEM tire size of 215/50R16, and a 60.1mm center bore.
Other years of the Jannarelly Design-1
2022 Jannarelly Design-1 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2022 Jannarelly Design-1
Tire geometry β 215/50R16
The 215/50R16 fitted to the 2022 Jannarelly Design-1 has a section width of 215mm and an aspect ratio of 50%, mounted on a 16-inch rim. That gives a sidewall height of 107.5mm (4.23") and an overall outside diameter of 621.4mm (24.46"). At highway speed this tire completes roughly 512 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2022 Jannarelly Design-1 while keeping the speedometer accurate, target a 225/42R17 (plus-one). For a softer ride or winter setup, a 205/59R15 (minus-one) keeps the overall diameter within Β±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2022 Jannarelly Design-1 uses a 4x100 bolt pattern with a 60.1mm hub bore. Safe rim width range for the OEM tire is 7.5J β 8.5J, and offsets in the ET30 β ET40 window will clear suspension and fender without rubbing on most setups.
Staggered setup notes
The 2022 Jannarelly Design-1 ships staggered: 215/50R16 up front and 235/45R16 on the rear. That is a 235mm vs 215mm width difference β do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2022 Jannarelly Design-1 is printed on the driver-side door jamb sticker β always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2022 Jannarelly Design-1 Roadster use?
The 2022 Jannarelly Design-1 Roadster uses 215/50R16 tires as standard equipment.
What is the bolt pattern of the 2022 Jannarelly Design-1?
The 2022 Jannarelly Design-1 has a 4x100 bolt pattern with a center bore of 60.1mm.
What is the wheel offset of the 2022 Jannarelly Design-1?
The 2022 Jannarelly Design-1 has a wheel offset of ET35.
Other Vehicles with 4x100 Bolt Pattern
The following vehicles share the same 4x100 bolt pattern as the 2022 Jannarelly Design-1, making wheel interchangeability possible (verify offset and center bore before swapping).