Bolt Pattern5x114.3
Center Bore71.5
Stud Size1/2-20
Advertisement

Detailed tire and wheel breakdown for the 1998 Jeep Wrangler

Tire geometry — 245/75R16

The 245/75R16 fitted to the 1998 Jeep Wrangler has a section width of 245mm and an aspect ratio of 75%, mounted on a 16-inch rim. That gives a sidewall height of 183.8mm (7.23") and an overall outside diameter of 773.9mm (30.47"). At highway speed this tire completes roughly 411 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 1998 Jeep Wrangler while keeping the speedometer accurate, target a 255/67R17 (plus-one). For a softer ride or winter setup, a 235/84R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 1998 Jeep Wrangler uses a 5x114.3 bolt pattern with a 71.5mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET8 – ET18 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 1998 Jeep Wrangler is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
Rubicon245/75R1616" x 8.0ET13

Frequently Asked Questions

What tire size does the 1998 Jeep Wrangler Rubicon use?

The 1998 Jeep Wrangler Rubicon uses 245/75R16 tires as standard equipment.

What is the bolt pattern of the 1998 Jeep Wrangler Rubicon?

The 1998 Jeep Wrangler Rubicon has a 5x114.3 bolt pattern with a center bore of 71.5mm.

What is the wheel offset of the 1998 Jeep Wrangler Rubicon?

The 1998 Jeep Wrangler Rubicon has a wheel offset of ETET13.