Bolt Pattern5x127
Center Bore71.5
Stud Size1/2-20
Advertisement

Detailed tire and wheel breakdown for the 2008 Jeep Wrangler

Tire geometry — 255/75R17

The 255/75R17 fitted to the 2008 Jeep Wrangler has a section width of 255mm and an aspect ratio of 75%, mounted on a 17-inch rim. That gives a sidewall height of 191.3mm (7.53") and an overall outside diameter of 814.3mm (32.06"). At highway speed this tire completes roughly 391 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2008 Jeep Wrangler while keeping the speedometer accurate, target a 265/67R18 (plus-one). For a softer ride or winter setup, a 245/83R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2008 Jeep Wrangler uses a 5x127 bolt pattern with a 71.5mm hub bore. Safe rim width range for the OEM tire is 7.0J – 8.0J, and offsets in the ET39 – ET49 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2008 Jeep Wrangler is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
Rubicon255/75R1717" x 7.5ET44

Frequently Asked Questions

What tire size does the 2008 Jeep Wrangler Rubicon use?

The 2008 Jeep Wrangler Rubicon uses 255/75R17 tires as standard equipment.

What is the bolt pattern of the 2008 Jeep Wrangler Rubicon?

The 2008 Jeep Wrangler Rubicon has a 5x127 bolt pattern with a center bore of 71.5mm.

What is the wheel offset of the 2008 Jeep Wrangler Rubicon?

The 2008 Jeep Wrangler Rubicon has a wheel offset of ETET44.