Bolt Pattern5x165.1
Center Bore113.1
Stud SizeM 16x1.5
Advertisement

Detailed tire and wheel breakdown for the 1986 Land Rover Defender

Tire geometry — 235/85R16

The 235/85R16 fitted to the 1986 Land Rover Defender has a section width of 235mm and an aspect ratio of 85%, mounted on a 16-inch rim. That gives a sidewall height of 199.8mm (7.86") and an overall outside diameter of 805.9mm (31.73"). At highway speed this tire completes roughly 395 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 1986 Land Rover Defender while keeping the speedometer accurate, target a 245/76R17 (plus-one). For a softer ride or winter setup, a 225/94R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 1986 Land Rover Defender uses a 5x165.1 bolt pattern with a 113.1mm hub bore. Safe rim width range for the OEM tire is 6.5J – 7.5J, and offsets in the ET28 – ET38 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 1986 Land Rover Defender is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
110235/85R1616" x 7.0ET33

Frequently Asked Questions

What tire size does the 1986 Land Rover Defender 110 use?

The 1986 Land Rover Defender 110 uses 235/85R16 tires as standard equipment.

What is the bolt pattern of the 1986 Land Rover Defender 110?

The 1986 Land Rover Defender 110 has a 5x165.1 bolt pattern with a center bore of 113.1mm.

What is the wheel offset of the 1986 Land Rover Defender 110?

The 1986 Land Rover Defender 110 has a wheel offset of ETET33.