2022 Leapmotor T03 Bolt Pattern & Tire Size
The 2022 Leapmotor T03 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2022 Leapmotor T03 has a 4x100 bolt pattern, an OEM tire size of 165/65R15, and a 54.1mm center bore.
2022 Leapmotor T03 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2022 Leapmotor T03
Tire geometry β 165/65R15
The 165/65R15 fitted to the 2022 Leapmotor T03 has a section width of 165mm and an aspect ratio of 65%, mounted on a 15-inch rim. That gives a sidewall height of 107.3mm (4.22") and an overall outside diameter of 595.5mm (23.44"). At highway speed this tire completes roughly 535 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2022 Leapmotor T03 while keeping the speedometer accurate, target a 175/54R16 (plus-one). For a softer ride or winter setup, a 155/77R14 (minus-one) keeps the overall diameter within Β±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2022 Leapmotor T03 uses a 4x100 bolt pattern with a 54.1mm hub bore. Safe rim width range for the OEM tire is 5.0J β 6.0J, and offsets in the ET35 β ET45 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2022 Leapmotor T03 is printed on the driver-side door jamb sticker β always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2022 Leapmotor T03 Standard use?
The 2022 Leapmotor T03 Standard uses 165/65R15 tires as standard equipment.
What is the bolt pattern of the 2022 Leapmotor T03?
The 2022 Leapmotor T03 has a 4x100 bolt pattern with a center bore of 54.1mm.
What is the wheel offset of the 2022 Leapmotor T03?
The 2022 Leapmotor T03 has a wheel offset of ET40.
Other Vehicles with 4x100 Bolt Pattern
The following vehicles share the same 4x100 bolt pattern as the 2022 Leapmotor T03, making wheel interchangeability possible (verify offset and center bore before swapping).