The 2021 Lynk & Co 03 has a 5x108 bolt pattern, an OEM tire size of 245/35R19, and a 63.4mm center bore.

Other years of the Lynk & Co 03

2026 032025 032024 032023 032022 032020 032019 032018 03

2021 Lynk & Co 03 Engine & Trim Levels

Cyan Racing
Bolt Pattern5x108
Center Bore63.4
Stud SizeM 14x1.5
Advertisement

Detailed tire and wheel breakdown for the 2021 Lynk & Co 03

Tire geometry — 245/35R19

The 245/35R19 fitted to the 2021 Lynk & Co 03 has a section width of 245mm and an aspect ratio of 35%, mounted on a 19-inch rim. That gives a sidewall height of 85.8mm (3.38") and an overall outside diameter of 654.1mm (25.75"). At highway speed this tire completes roughly 487 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2021 Lynk & Co 03 while keeping the speedometer accurate, target a 255/29R20 (plus-one). For a softer ride or winter setup, a 235/42R18 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2021 Lynk & Co 03 uses a 5x108 bolt pattern with a 63.4mm hub bore. Safe rim width range for the OEM tire is 7.5J – 8.5J, and offsets in the ET35 – ET45 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2021 Lynk & Co 03 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

OEM Wheel & Tire Specs

Engine & TrimTire SizeRim SizeOffset (ET)
Cyan Racing19x8.0JET40

Frequently Asked Questions

What tire size does the 2021 Lynk & Co 03 Cyan Racing use?

The 2021 Lynk & Co 03 Cyan Racing uses 245/35R19 tires as standard equipment.

What is the bolt pattern of the 2021 Lynk & Co 03?

The 2021 Lynk & Co 03 has a 5x108 bolt pattern with a center bore of 63.4mm.

What is the wheel offset of the 2021 Lynk & Co 03?

The 2021 Lynk & Co 03 has a wheel offset of ET40.

Other Vehicles with 5x108 Bolt Pattern

The following vehicles share the same 5x108 bolt pattern as the 2021 Lynk & Co 03, making wheel interchangeability possible (verify offset and center bore before swapping).