2000 Mercedes-Benz SL Bolt Pattern & Tire Size
The 2000 Mercedes-Benz SL OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2000 Mercedes-Benz SL has a 5x112 bolt pattern, an OEM tire size of 225/55R16, and a 66.6mm center bore.
Other years of the Mercedes-Benz SL
2000 Mercedes-Benz SL Engine & Trim Levels
Detailed tire and wheel breakdown for the 2000 Mercedes-Benz SL
Tire geometry â 225/55R16
The 225/55R16 fitted to the 2000 Mercedes-Benz SL has a section width of 225mm and an aspect ratio of 55%, mounted on a 16-inch rim. That gives a sidewall height of 123.8mm (4.87") and an overall outside diameter of 653.9mm (25.74"). At highway speed this tire completes roughly 487 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2000 Mercedes-Benz SL while keeping the speedometer accurate, target a 235/47R17 (plus-one). For a softer ride or winter setup, a 215/63R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2000 Mercedes-Benz SL uses a 5x112 bolt pattern with a 66.6mm hub bore. Safe rim width range for the OEM tire is 7.5J â 8.5J, and offsets in the ET29 â ET39 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2000 Mercedes-Benz SL is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2000 Mercedes-Benz SL SL500 use?
The 2000 Mercedes-Benz SL SL500 uses 225/55R16 tires as standard equipment.
What is the bolt pattern of the 2000 Mercedes-Benz SL?
The 2000 Mercedes-Benz SL has a 5x112 bolt pattern with a center bore of 66.6mm.
What is the wheel offset of the 2000 Mercedes-Benz SL?
The 2000 Mercedes-Benz SL has a wheel offset of ET34.
Other Vehicles with 5x112 Bolt Pattern
The following vehicles share the same 5x112 bolt pattern as the 2000 Mercedes-Benz SL, making wheel interchangeability possible (verify offset and center bore before swapping).