2023 Microcar M.Go High Bolt Pattern, Tire Size & Offset

Home/Microcar/M.Go/2023/High

Bolt Pattern4x100

Center Bore60.1

Stud SizeM 12x1.5

Detailed tire and wheel breakdown for the 2023 Microcar M.Go

Tire geometry — 155/65R14

The 155/65R14 fitted to the 2023 Microcar M.Go has a section width of 155mm and an aspect ratio of 65%, mounted on a 14-inch rim. That gives a sidewall height of 100.8mm (3.97") and an overall outside diameter of 557.1mm (21.93"). At highway speed this tire completes roughly 571 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2023 Microcar M.Go while keeping the speedometer accurate, target a 165/53R15 (plus-one). For a softer ride or winter setup, a 145/78R13 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2023 Microcar M.Go uses a 4x100 bolt pattern with a 60.1mm hub bore. Safe rim width range for the OEM tire is 4.0J – 5.0J, and offsets in the ET30 – ET40 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2023 Microcar M.Go is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & Trim	Tire Size	Rim Size	Offset (ET)
High	155/65R14	14" x 4.5	ET35

Frequently Asked Questions

What tire size does the 2023 Microcar M.Go High use?

The 2023 Microcar M.Go High uses 155/65R14 tires as standard equipment.

What is the bolt pattern of the 2023 Microcar M.Go High?

The 2023 Microcar M.Go High has a 4x100 bolt pattern with a center bore of 60.1mm.

What is the wheel offset of the 2023 Microcar M.Go High?

The 2023 Microcar M.Go High has a wheel offset of ETET35.