Bolt Pattern5x115
Center Bore70.3
Stud SizeM 12x1.5
Advertisement

Detailed tire and wheel breakdown for the 2000 Oldsmobile Alero

Tire geometry — 225/50R16

The 225/50R16 fitted to the 2000 Oldsmobile Alero has a section width of 225mm and an aspect ratio of 50%, mounted on a 16-inch rim. That gives a sidewall height of 112.5mm (4.43") and an overall outside diameter of 631.4mm (24.86"). At highway speed this tire completes roughly 504 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2000 Oldsmobile Alero while keeping the speedometer accurate, target a 235/42R17 (plus-one). For a softer ride or winter setup, a 215/58R15 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2000 Oldsmobile Alero uses a 5x115 bolt pattern with a 70.3mm hub bore. Safe rim width range for the OEM tire is 6.0J – 7.0J, and offsets in the ET37 – ET47 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2000 Oldsmobile Alero is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
GLS225/50R1616" x 6.5ET42

Frequently Asked Questions

What tire size does the 2000 Oldsmobile Alero GLS use?

The 2000 Oldsmobile Alero GLS uses 225/50R16 tires as standard equipment.

What is the bolt pattern of the 2000 Oldsmobile Alero GLS?

The 2000 Oldsmobile Alero GLS has a 5x115 bolt pattern with a center bore of 70.3mm.

What is the wheel offset of the 2000 Oldsmobile Alero GLS?

The 2000 Oldsmobile Alero GLS has a wheel offset of ETET42.