1997 Oldsmobile Cutlass Bolt Pattern & Tire Size
The 1997 Oldsmobile Cutlass OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 1997 Oldsmobile Cutlass has a 5x115 bolt pattern, an OEM tire size of 215/60R15, and a 70.3mm center bore.
Other years of the Oldsmobile Cutlass
1997 Oldsmobile Cutlass Engine & Trim Levels
Detailed tire and wheel breakdown for the 1997 Oldsmobile Cutlass
Tire geometry â 215/60R15
The 215/60R15 fitted to the 1997 Oldsmobile Cutlass has a section width of 215mm and an aspect ratio of 60%, mounted on a 15-inch rim. That gives a sidewall height of 129.0mm (5.08") and an overall outside diameter of 639.0mm (25.16"). At highway speed this tire completes roughly 498 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 1997 Oldsmobile Cutlass while keeping the speedometer accurate, target a 225/52R16 (plus-one). For a softer ride or winter setup, a 205/69R14 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 1997 Oldsmobile Cutlass uses a 5x115 bolt pattern with a 70.3mm hub bore. Safe rim width range for the OEM tire is 5.5J â 6.5J, and offsets in the ET42 â ET52 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 1997 Oldsmobile Cutlass is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 1997 Oldsmobile Cutlass GLS use?
The 1997 Oldsmobile Cutlass GLS uses 215/60R15 tires as standard equipment.
What is the bolt pattern of the 1997 Oldsmobile Cutlass?
The 1997 Oldsmobile Cutlass has a 5x115 bolt pattern with a center bore of 70.3mm.
What is the wheel offset of the 1997 Oldsmobile Cutlass?
The 1997 Oldsmobile Cutlass has a wheel offset of ET47.
Other Vehicles with 5x115 Bolt Pattern
The following vehicles share the same 5x115 bolt pattern as the 1997 Oldsmobile Cutlass, making wheel interchangeability possible (verify offset and center bore before swapping).