2025 ORA Ballet Cat Base
The 2025 ORA Ballet Cat Base tire size and wheel specifications below reflect standard OEM reference fitment data for this trim level.
Detailed tire and wheel breakdown for the 2025 ORA Ballet Cat
Tire geometry â 225/55R18
The 225/55R18 fitted to the 2025 ORA Ballet Cat has a section width of 225mm and an aspect ratio of 55%, mounted on a 18-inch rim. That gives a sidewall height of 123.8mm (4.87") and an overall outside diameter of 704.7mm (27.74"). At highway speed this tire completes roughly 452 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2025 ORA Ballet Cat while keeping the speedometer accurate, target a 235/47R19 (plus-one). For a softer ride or winter setup, a 215/63R17 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2025 ORA Ballet Cat uses a 5x114.3 bolt pattern with a 54.1mm hub bore. Safe rim width range for the OEM tire is 6.5J â 7.5J, and offsets in the ET37 â ET47 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2025 ORA Ballet Cat is printed on the driver-side door jamb sticker â always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
Fitment Specifications
| Engine & Trim | Tire Size | Rim Size | Offset (ET) |
|---|---|---|---|
| Base | 225/55R18 | 18" x 7.0 | ET42 |
Frequently Asked Questions
What tire size does the 2025 ORA Ballet Cat Base use?
The 2025 ORA Ballet Cat Base uses 225/55R18 tires as standard equipment.
What is the bolt pattern of the 2025 ORA Ballet Cat Base?
The 2025 ORA Ballet Cat Base has a 5x114.3 bolt pattern with a center bore of 54.1mm.
What is the wheel offset of the 2025 ORA Ballet Cat Base?
The 2025 ORA Ballet Cat Base has a wheel offset of ETET42.