2015 Peugeot 2008 Bolt Pattern & Tire Size
The 2015 Peugeot 2008 OEM tire size, bolt pattern, and wheel specifications are listed below. All data is based on industry-standard OEM reference specifications.
The 2015 Peugeot 2008 has a 4x108 bolt pattern, an OEM tire size of 205/50R17, and a 65.1mm center bore.
Other years of the Peugeot 2008
2015 Peugeot 2008 Engine & Trim Levels
Detailed tire and wheel breakdown for the 2015 Peugeot 2008
Tire geometry — 205/50R17
The 205/50R17 fitted to the 2015 Peugeot 2008 has a section width of 205mm and an aspect ratio of 50%, mounted on a 17-inch rim. That gives a sidewall height of 102.5mm (4.04") and an overall outside diameter of 636.8mm (25.07"). At highway speed this tire completes roughly 500 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.
Plus-sizing window
If you want to upsize wheels on the 2015 Peugeot 2008 while keeping the speedometer accurate, target a 215/42R18 (plus-one). For a softer ride or winter setup, a 195/59R16 (minus-one) keeps the overall diameter within ±3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.
Wheel fitment specs
The 2015 Peugeot 2008 uses a 4x108 bolt pattern with a 65.1mm hub bore. Safe rim width range for the OEM tire is 6.0J – 7.0J, and offsets in the ET15 – ET25 window will clear suspension and fender without rubbing on most setups.
Tire pressure guidance
Manufacturer-recommended cold tire pressure for the 2015 Peugeot 2008 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.
OEM Wheel & Tire Specs
Frequently Asked Questions
What tire size does the 2015 Peugeot 2008 GT Line use?
The 2015 Peugeot 2008 GT Line uses 205/50R17 tires as standard equipment.
What is the bolt pattern of the 2015 Peugeot 2008?
The 2015 Peugeot 2008 has a 4x108 bolt pattern with a center bore of 65.1mm.
What is the wheel offset of the 2015 Peugeot 2008?
The 2015 Peugeot 2008 has a wheel offset of ET20.
Other Vehicles with 4x108 Bolt Pattern
The following vehicles share the same 4x108 bolt pattern as the 2015 Peugeot 2008, making wheel interchangeability possible (verify offset and center bore before swapping).