Bolt Pattern5x130
Center Bore71.6
Stud SizeM 14x1.5
Advertisement

Detailed tire and wheel breakdown for the 1996 Porsche 911

Tire geometry — 205/50R17

The 205/50R17 fitted to the 1996 Porsche 911 has a section width of 205mm and an aspect ratio of 50%, mounted on a 17-inch rim. That gives a sidewall height of 102.5mm (4.04") and an overall outside diameter of 636.8mm (25.07"). At highway speed this tire completes roughly 500 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 1996 Porsche 911 while keeping the speedometer accurate, target a 215/42R18 (plus-one). For a softer ride or winter setup, a 195/59R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 1996 Porsche 911 uses a 5x130 bolt pattern with a 71.6mm hub bore. Safe rim width range for the OEM tire is 6.5J – 7.5J, and offsets in the ET50 – ET60 window will clear suspension and fender without rubbing on most setups.

Staggered setup notes

The 1996 Porsche 911 ships staggered: 205/50R17 up front and 255/40R17 on the rear. That is a 255mm vs 205mm width difference — do not rotate front-to-rear, and replace tires in axle pairs to keep ABS and traction control balanced.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 1996 Porsche 911 is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
Carrera205/50R17
Rear: 255/40R17
17" x 7.0ET55

Frequently Asked Questions

What tire size does the 1996 Porsche 911 Carrera use?

The 1996 Porsche 911 Carrera uses 205/50R17 tires as standard equipment.

What is the bolt pattern of the 1996 Porsche 911 Carrera?

The 1996 Porsche 911 Carrera has a 5x130 bolt pattern with a center bore of 71.6mm.

What is the wheel offset of the 1996 Porsche 911 Carrera?

The 1996 Porsche 911 Carrera has a wheel offset of ETET55.