Bolt Pattern5x100
Center Bore56.1
Stud SizeM 12x1.25
Advertisement

Detailed tire and wheel breakdown for the 2012 Subaru Outback

Tire geometry — 225/60R17

The 225/60R17 fitted to the 2012 Subaru Outback has a section width of 225mm and an aspect ratio of 60%, mounted on a 17-inch rim. That gives a sidewall height of 135.0mm (5.31") and an overall outside diameter of 701.8mm (27.63"). At highway speed this tire completes roughly 454 revolutions per kilometre, which is what your speedometer and odometer are calibrated against.

Plus-sizing window

If you want to upsize wheels on the 2012 Subaru Outback while keeping the speedometer accurate, target a 235/52R18 (plus-one). For a softer ride or winter setup, a 215/69R16 (minus-one) keeps the overall diameter within Âą3% of stock, which is the industry tolerance for ABS and stability control to stay calibrated.

Wheel fitment specs

The 2012 Subaru Outback uses a 5x100 bolt pattern with a 56.1mm hub bore. Safe rim width range for the OEM tire is 6.5J – 7.5J, and offsets in the ET43 – ET53 window will clear suspension and fender without rubbing on most setups.

Tire pressure guidance

Manufacturer-recommended cold tire pressure for the 2012 Subaru Outback is printed on the driver-side door jamb sticker — always defer to that value, not to the maximum pressure printed on the tire sidewall. Check pressure monthly and before long trips; under-inflation by 20% can reduce tread life by 25%.

Fitment Specifications

Engine & TrimTire SizeRim SizeOffset (ET)
3.6R225/60R1717" x 7.0ET48

Frequently Asked Questions

What tire size does the 2012 Subaru Outback 3.6R use?

The 2012 Subaru Outback 3.6R uses 225/60R17 tires as standard equipment.

What is the bolt pattern of the 2012 Subaru Outback 3.6R?

The 2012 Subaru Outback 3.6R has a 5x100 bolt pattern with a center bore of 56.1mm.

What is the wheel offset of the 2012 Subaru Outback 3.6R?

The 2012 Subaru Outback 3.6R has a wheel offset of ETET48.