Section Width105 mm (4.1")
Aspect Ratio140%
Rim Diameter10"
Overall Diameter548 mm (21.6")
Sidewall Height147 mm
Circumference1722 mm
105/140R10 — Buy Tires

Everything to know about the 105/140R10 tire size

Size geometry

A 105/140R10 tire has a 105mm section width and a 140% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 147.0mm (5.79") and overall outside diameter is 548.0mm (21.57"). At highway speed the tire completes about 581 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 105/140R10 is unavailable, the closest same-diameter substitutes on the same rim are 95/155R10 and 115/128R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 105/140R10 you can upsize to 115/117R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 95/168R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 105/140R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 105/140R10

tire_size.no_vehicles_found