Section Width105 mm (4.1")
Aspect Ratio240%
Rim Diameter18"
Overall Diameter961 mm (37.8")
Sidewall Height252 mm
Circumference3020 mm
105/240R18 — Buy Tires

Everything to know about the 105/240R18 tire size

Size geometry

A 105/240R18 tire has a 105mm section width and a 240% aspect ratio, mounted on a 18-inch rim. Sidewall height works out to 252.0mm (9.92") and overall outside diameter is 961.2mm (37.84"). At highway speed the tire completes about 331 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 105/240R18 is unavailable, the closest same-diameter substitutes on the same rim are 95/265R18 and 115/219R18. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 105/240R18 you can upsize to 115/208R19 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 95/279R17 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 105/240R18 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 105/240R18

tire_size.no_vehicles_found