Section Width105 mm (4.1")
Aspect Ratio421%
Rim Diameter38"
Overall Diameter1849 mm (72.8")
Sidewall Height442 mm
Circumference5810 mm
105/421R38 — Buy Tires

Everything to know about the 105/421R38 tire size

Size geometry

A 105/421R38 tire has a 105mm section width and a 421% aspect ratio, mounted on a 38-inch rim. Sidewall height works out to 442.1mm (17.40") and overall outside diameter is 1849.3mm (72.81"). At highway speed the tire completes about 172 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 105/421R38 is unavailable, the closest same-diameter substitutes on the same rim are 95/465R38 and 115/384R38. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 105/421R38 you can upsize to 115/373R39 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 95/479R37 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 105/421R38 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 105/421R38

tire_size.no_vehicles_found