Section Width105 mm (4.1")
Aspect Ratio52%
Rim Diameter25"
Overall Diameter744 mm (29.3")
Sidewall Height55 mm
Circumference2338 mm
105/52R25 — Buy Tires

Everything to know about the 105/52R25 tire size

Size geometry

A 105/52R25 tire has a 105mm section width and a 52% aspect ratio, mounted on a 25-inch rim. Sidewall height works out to 54.6mm (2.15") and overall outside diameter is 744.2mm (29.30"). At highway speed the tire completes about 428 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 105/52R25 is unavailable, the closest same-diameter substitutes on the same rim are 95/57R25 and 115/47R25. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 105/52R25 you can upsize to 115/36R26 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 95/71R24 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 105/52R25 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 105/52R25

tire_size.no_vehicles_found