Section Width105 mm (4.1")
Aspect Ratio72%
Rim Diameter11"
Overall Diameter431 mm (16.9")
Sidewall Height76 mm
Circumference1353 mm
105/72R11 — Buy Tires

Everything to know about the 105/72R11 tire size

Size geometry

A 105/72R11 tire has a 105mm section width and a 72% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 75.6mm (2.98") and overall outside diameter is 430.6mm (16.95"). At highway speed the tire completes about 739 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 105/72R11 is unavailable, the closest same-diameter substitutes on the same rim are 95/80R11 and 115/66R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 105/72R11 you can upsize to 115/55R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 95/93R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 105/72R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 105/72R11

tire_size.no_vehicles_found