Section Width115 mm (4.5")
Aspect Ratio201%
Rim Diameter10"
Overall Diameter716 mm (28.2")
Sidewall Height231 mm
Circumference2250 mm
115/201R10 — Buy Tires

Everything to know about the 115/201R10 tire size

Size geometry

A 115/201R10 tire has a 115mm section width and a 201% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 231.2mm (9.10") and overall outside diameter is 716.3mm (28.20"). At highway speed the tire completes about 444 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/201R10 is unavailable, the closest same-diameter substitutes on the same rim are 105/220R10 and 125/185R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/201R10 you can upsize to 125/175R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/232R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/201R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/201R10

tire_size.no_vehicles_found