Section Width115 mm (4.5")
Aspect Ratio265%
Rim Diameter10"
Overall Diameter864 mm (34.0")
Sidewall Height305 mm
Circumference2713 mm
115/265R10 — Buy Tires

Everything to know about the 115/265R10 tire size

Size geometry

A 115/265R10 tire has a 115mm section width and a 265% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 304.8mm (12.00") and overall outside diameter is 863.5mm (34.00"). At highway speed the tire completes about 369 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/265R10 is unavailable, the closest same-diameter substitutes on the same rim are 105/290R10 and 125/244R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/265R10 you can upsize to 125/234R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/302R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/265R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/265R10

tire_size.no_vehicles_found