Section Width115 mm (4.5")
Aspect Ratio271%
Rim Diameter48"
Overall Diameter1843 mm (72.5")
Sidewall Height312 mm
Circumference5788 mm
115/271R48 — Buy Tires

Everything to know about the 115/271R48 tire size

Size geometry

A 115/271R48 tire has a 115mm section width and a 271% aspect ratio, mounted on a 48-inch rim. Sidewall height works out to 311.6mm (12.27") and overall outside diameter is 1842.5mm (72.54"). At highway speed the tire completes about 173 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/271R48 is unavailable, the closest same-diameter substitutes on the same rim are 105/297R48 and 125/249R48. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/271R48 you can upsize to 125/239R49 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/309R47 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/271R48 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/271R48

tire_size.no_vehicles_found