Section Width115 mm (4.5")
Aspect Ratio32%
Rim Diameter67"
Overall Diameter1775 mm (69.9")
Sidewall Height37 mm
Circumference5578 mm
115/32R67 — Buy Tires

Everything to know about the 115/32R67 tire size

Size geometry

A 115/32R67 tire has a 115mm section width and a 32% aspect ratio, mounted on a 67-inch rim. Sidewall height works out to 36.8mm (1.45") and overall outside diameter is 1775.4mm (69.90"). At highway speed the tire completes about 179 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/32R67 is unavailable, the closest same-diameter substitutes on the same rim are 105/35R67 and 125/29R67. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/32R67 you can upsize to 125/19R68 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/47R66 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/32R67 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/32R67

tire_size.no_vehicles_found