Section Width115 mm (4.5")
Aspect Ratio332%
Rim Diameter44"
Overall Diameter1881 mm (74.1")
Sidewall Height382 mm
Circumference5910 mm
115/332R44 — Buy Tires

Everything to know about the 115/332R44 tire size

Size geometry

A 115/332R44 tire has a 115mm section width and a 332% aspect ratio, mounted on a 44-inch rim. Sidewall height works out to 381.8mm (15.03") and overall outside diameter is 1881.2mm (74.06"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/332R44 is unavailable, the closest same-diameter substitutes on the same rim are 105/364R44 and 125/305R44. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/332R44 you can upsize to 125/295R45 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/376R43 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/332R44 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/332R44

tire_size.no_vehicles_found