Section Width115 mm (4.5")
Aspect Ratio420%
Rim Diameter35"
Overall Diameter1855 mm (73.0")
Sidewall Height483 mm
Circumference5828 mm
115/420R35 — Buy Tires

Everything to know about the 115/420R35 tire size

Size geometry

A 115/420R35 tire has a 115mm section width and a 420% aspect ratio, mounted on a 35-inch rim. Sidewall height works out to 483.0mm (19.02") and overall outside diameter is 1855.0mm (73.03"). At highway speed the tire completes about 172 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/420R35 is unavailable, the closest same-diameter substitutes on the same rim are 105/460R35 and 125/386R35. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/420R35 you can upsize to 125/376R36 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/472R34 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/420R35 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/420R35

tire_size.no_vehicles_found