Section Width115 mm (4.5")
Aspect Ratio454%
Rim Diameter32"
Overall Diameter1857 mm (73.1")
Sidewall Height522 mm
Circumference5834 mm
115/454R32 — Buy Tires

Everything to know about the 115/454R32 tire size

Size geometry

A 115/454R32 tire has a 115mm section width and a 454% aspect ratio, mounted on a 32-inch rim. Sidewall height works out to 522.1mm (20.56") and overall outside diameter is 1857.0mm (73.11"). At highway speed the tire completes about 171 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/454R32 is unavailable, the closest same-diameter substitutes on the same rim are 105/497R32 and 125/418R32. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/454R32 you can upsize to 125/408R33 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/509R31 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/454R32 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/454R32

tire_size.no_vehicles_found