Section Width115 mm (4.5")
Aspect Ratio90%
Rim Diameter62"
Overall Diameter1782 mm (70.2")
Sidewall Height104 mm
Circumference5598 mm
115/90R62 — Buy Tires

Everything to know about the 115/90R62 tire size

Size geometry

A 115/90R62 tire has a 115mm section width and a 90% aspect ratio, mounted on a 62-inch rim. Sidewall height works out to 103.5mm (4.07") and overall outside diameter is 1781.8mm (70.15"). At highway speed the tire completes about 179 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 115/90R62 is unavailable, the closest same-diameter substitutes on the same rim are 105/99R62 and 125/83R62. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 115/90R62 you can upsize to 125/73R63 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 105/111R61 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 115/90R62 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 115/90R62

tire_size.no_vehicles_found